Faraday bags and signal privacy
A Faraday bag is a pouch lined with conductive fabric that blocks radio signals going in and out. People use them to keep a phone from connecting, to stop key fobs from being relayed, or to store spare electronics. The useful question isn't "is it a Faraday bag?" but "how much does it block, at which frequencies, and how was that measured?"
What decibels (dB) of attenuation mean
Shielding is measured in decibels of attenuation. The scale is logarithmic, so every 10 dB is another tenfold cut in signal power:
| Attenuation | Signal power that gets through |
|---|---|
| 20 dB | 1/100 |
| 40 dB | 1/10,000 |
| 60 dB | 1/1,000,000 |
| 80 dB | 1/100,000,000 |
A phone near a strong cell tower can sometimes still connect through weak shielding, so a bag that only blocks a little may fail exactly when you need it.
What a credible spec looks like
- A dB figure across a stated frequency range, not a single number with no context. Cellular, Wi-Fi, Bluetooth, GPS and key fobs use different frequencies.
- A named test method or lab. Some makers cite shielding-effectiveness test methods for enclosures, such as IEEE 299. Ask for the report.
- Details on the closure. Seams and the opening are usually the weakest point, so the roll-top or double fold matters as much as the fabric.
Why "EMP-proof" is a red flag on its own
An electromagnetic pulse (from a high-altitude nuclear detonation, or a severe solar storm affecting long power lines) is a very different threat from blocking a phone signal. Military and infrastructure EMP protection is specified by detailed standards and tested at the facility level. A consumer pouch labeled "EMP-proof" with no test data, frequency range or method isn't telling you anything you can verify. Treat it as marketing until the seller shows numbers.
Also note that large-scale EMP effects mostly threaten things connected to long conductors like power lines and antennas. Small, unplugged electronics stored in a well-sealed metal container are a different situation from equipment plugged into the grid. Shielding is one layer, not a guarantee.
A simple check you can do at home
- Put your phone in the bag and seal it exactly as the instructions say.
- Call it from another phone and send it a message. Also try near a window, where signal is stronger.
- If it rings or the message arrives when you take it out right away, the bag is leaking.
This only tells you pass or fail at that spot and those frequencies. It doesn't measure dB, but it catches bags that clearly don't work, and it's worth repeating as the bag wears.
Care and wear
- Conductive fabric can crack at fold lines over time. Re-test every few months.
- Don't overstuff the bag. A closure that won't seal properly defeats the shielding.
- Remember that a phone in a Faraday bag can't receive emergency alerts.